SP7653

Wide Input Voltage Range, 1.3MHz, Buck Regulator
Data Sheets OBS (Obsolete)

Overview

Information
# of Outputs 1
IOUT (A) 3
VIN MIN (V) 2.5
VIN MAX (V) 20
IQ (µA) 1500
VOUT MIN (V) 0.8
VOUT MAX (V) 19
Frequency (kHz) 1300
Accuracy (%)
Efficiency (%) 91
Package
X x Y Package Dimension (mm)
Control Mode
Special Features
Operating Temperature (°C)
Show more

The SP7653 is a synchronous step-down switching regulator optimized for high efficiency. The part is designed to be especially attractive for dual supply, 12V to 20V distributed power systems stepped-down with 5V used to power the controller. This lower VCC voltage minimizes power dissipation in the part and is used to drive the top switch. The SP7653 is designed to provide a fully integrated buck regulator solution using a fixed 1.3MHz frequency, PWM voltage mode architecture. Protection features include UnderVoltage Lock Out (UVLO), thermal shutdown and output short-circuit protection. The SP7653 is available in the space saving DFN package.

  • 2.5V to 20V step-down achieved using dual input
  • Output voltage down to 0.8V
  • 3A output capability
  • Built in low RDSON power switches (40 mΩ typical)
  • Highly integrated design, minimal components
  • 1.3MHz fixed frequency operation
  • UVLO detects both VCC and VIN
  • Over temperature protection
  • Short-circuit protection with auto restart
  • Wide BW Amp allows type II or III compensation
  • Programmable soft-start
  • Fast transient response
  • High efficiency: greater than 95% possible
  • Nonsynchronous start up into a pre-charged output
  • Small 7mm x 4mm DFN package

Documentation & Design Tools

Type Title Version Date File Size
Data Sheets sp7653 Wide Input Voltage Range, 1.3MHz, Buck Regulator 1.0.0 December 2006 797.4 KB
Design Solutions DS-57, Using First Generation PowerBlox With Up To 16V Input For Providing 3A LED Drive Current, Using Only 0.5 Square Inch Design Solution November 2007 147.4 KB
Design Solutions DS-05, SP7653 Converts 5V input to 1.2V output at 2.5A January 2006 166.5 KB
Spice Models - Generic Generic Spice Model November 2007 4.2 KB
Spice Models - OrCAD Orcad Spice Model November 2007 19.7 KB
Product Brochures Power Management Brochure R01 November 2024 2.4 MB
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Parts & Purchasing

Part Number Pkg Code Min Temp Max Temp Status Suggested Replacement PDN
SP7653ER DFN26 7x4 -40 85 OBS
SP7653ER-L DFN26 7x4 -40 85 OBS SP7651ER-L
SP7653ER-L/TR DFN26 7x4 -40 85 OBS SP7651ER-L/TR
SP7653ER/TR DFN26 7x4 -40 85 OBS
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Packaging

Pkg Code Details Quantities Dimensions
DFN26 7x4
  • JEDEC Reference: n/a
  • MSL Pb-Free: L3 @ 260ºC
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 36ºC/W
  • Bulk Pack Style: Canister
  • Quantity per Bulk Pack: n/a
  • Quantity per Reel: 3000
  • Quantity per Tube: n/a
  • Quantity per Tray: n/a
  • Reel Size (Dia. x Width x Pitch): 330 x 16 x 8
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 7
  • Width: 4
  • Thickness: 1.00
  • Lead Pitch: 0.5

Notifications

Distribution Date Description File
07/17/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability. ADDENDUM A: Fixed MBB label logo for DX204001 to MaxLinear logo. ADDENDUM B: Replaced ‘All other affected products outer box label’ with clearer pictures. Corrected Date Issued (from original PCN) issue date +90 days to August 30, 2023.
06/01/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability.
06/01/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability. ADDENDUM: Fixed MBB label logo for DX204001 to MaxLinear logo.
07/20/2015 Product discontinuation notification
10/16/2013 Qualified PPF (NiPdAu) lead termination finish in assembly to replace matte-tin plating. Material change.
10/04/2013 Addition of an alternate qualified assembly site, UTAC Thailand, for assembly using copper or gold wire bonding. Material change and alternate assembly site.
02/28/2007 Product Obsolescence Letter and Discontinuation Notification. Discontinued.

FAQs & Support

Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.

Submit a Technical Support Question As a New Question

Visit the product page for the part you are interested in.  The part's status is listed in the Parts & Purchasing section.  You can also view Product Lifecycle and Obsolescence Information including PDNs (Product Discontinuation Notifications).
 
To visit a product page, type the part into the search window on the top of the MaxLinear website.
 
In this example, we searched for XRA1201.  Visit the product page by clicking the part number or visit the orderable parts list by clicking "Orderable Parts". 
 
 
 

 

  

The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product.  Click Show obsolete parts, to see all EOL or OBS products.