XR22802

Hi-Speed USB to 10/100 Ethernet Bridge w/2-CH UARTs
Data Sheets Active
Order Now

Overview

Information Hi-Speed USB to 10/100 Ethernet Bridge w/2-CH UARTs
CPU Interface USB 2.0
Ethernet MAC/PHY (Mbps) 10/100
UART CH 2
Max Data Rate (Mbps) 15
UART Tx/Rx FIFO (Bytes) 1024/1024
Auto Half-Duplex Control ✔
No. of GPIOs 32
I2C Master ✔
HBM ESD (USB) (kV) 15
Supply Voltage Range VCC (V) 4.4 to 5.25
Max UART/GPIO Input Voltage (V) 3.6
Max UART/GPIO Output Voltage (V) 3.6
Temperature Range (°C) -40 to 85
Package QFN-56
Show more

The XR22802 is a Hi-Speed USB 2.0 compound device with an embedded hub and 5 downstream USB functions: 10/100 Ethernet MAC and PHY, 2 UARTs, multi-master capable I2C controller, and an Enhanced DedicatedGPIO Entity (EDGE) controller.

The upstream USB interface has an integrated USB 2.0 PHY and device controller that is compliant with both Hi-Speed (480Mbps) and Full-Speed (12Mbps) USB 2.0. The vendor ID, product ID, power mode, remotewakeup support and maximum power consumption are amongst the values that can be programmed using the on-chip One-Time Programmable (OTP) memory.

The Ethernet controller has an integrated 10/100 Ethernet MAC and PHY and is compliant with IEEE 802.3. The Ethernet controller supports autonegotiation, auto-MDIX, checksum offload, auto-polarity correction in 10Base-T and remote wakeup capabilities.

The enhanced UART has a maximum data rate of 15 Mbps. Using a fractional baud rate generator, any baud rate between 300 bps and 15 Mbps can be accurately generated. In addition, the UART has a large 1024-byte TX FIFO and RX FIFO to optimize the overall data throughput for various applications. The automatic RS485 control feature simplifies both the hardware and software for half-duplex RS-485 applications. If required, the multidrop (9-bit) mode feature further simplifies typical multidrop applications by enabling / disabling the UART receiver depending on the address byte received.

The multi-master capable I2C controller and EDGE controller (up to 32 GPIOs) can be accessed via the USB HID interface. The EDGE pins or I2C interface can be used for controlling and monitoring other peripherals. Up to 2 EDGE pins can be configured as a PWM generator.


  • USB 2.0 Compliant Interface
  • 10/100 Ethernet MAC and Phy
  • Enhanced UART
  • Half-Duplex Mode
  • I2C Multi-master
  • Enhanced Dedicated GPIO Entity (EDGE)
  • Single +5.0V Power Supply Input
  • Regulated +3.3V Output Power
  • Single 25MHz Crystal
  • ±15kV HBM ESD Protection on USB data pins
  • ±8kV HBM ESD Protection on all other pins

  • USB to Ethernet Dongles
  • POS Terminals
  • Test Instrumentation
  • Networking
  • Factory Automation and Process Controls
  • Industrial Applications

Download Software Drivers

Documentation & Design Tools

All Types Data Sheets Application Notes Schematics & Design Files Product Briefs & Brochures Software & Utilities User Guides & Manuals
Type Title Version Date File Size
Data Sheets XR22802 Hi-Speed USB to 10/100 Ethernet Bridge 1D April 2019 1 MB
Application Notes AN202, USB UART Board Design Considerations for USB Compliance R02 June 2023 2.4 MB
Application Notes AN-226, Windows Driver Customization for USB UARTs R00 February 2020 2.5 MB
User Guides & Manuals XR2280x USB Ethernet Bridges Design Guide 00 April 2020 2.3 MB
User Guides & Manuals XR22804 Evaluation Board User’s Manual 1A May 2016 1.4 MB
Software: GUIs & Utilities Sample USB UART GUI (Serial Test App) 1.2.0.0 July 2021 1.4 MB
Software: GUIs & Utilities Android Application 1C November 2015 476.6 KB
Product Flyers Full-Speed USB UART Family 1.1 November 2020 605.3 KB
Product Brochures Ethernet Brochure R04 November 2024 4.1 MB
Product Brochures Interface Brochure R02 November 2024 3.6 MB
Schematics & Design Files XR22802/804 Evaluation Board BRD, DSN Files June 2016 840.3 KB
Schematics & Design Files Evaluation Board Schematic 2.0 May 2016 76 KB
Software: Drivers Linux 3.6.x and Newer 1G August 2024 29.7 KB
Software: Drivers Windows 10 and newer 2.7.0.0 January 2023 169.2 KB
Software: Drivers Windows 11 1.1.0.2 January 2023 42.5 KB
Software: Drivers Windows 7, 8 2.6.0.0 December 2019 145.7 KB
Software: Drivers Windows 10 1.1.0.1 June 2018 78 KB
Software: Drivers Windows XP, Vista, 7 1.1.0.0 December 2017 86 KB
Software: Drivers XRUSB1 for Win XP SP3 and newer 2.2.5.0 March 2016 1 MB
Software: Drivers Linux 2.6.18 to 3.4.x 1A January 2015 19.1 KB
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Quality & RoHS

Part Number RoHS | Exempt RoHS Halogen Free REACH TSCA MSL Rating / Peak Reflow Package
XR22802IL56-F N Y Y Y Y L3 / 260ᵒC QFN56 8x8 OPT1

Click on the links above to download the Certificate of Non-Use of Hazardous Substances.

Additional Quality Documentation may be available, please Contact Support.

Parts & Purchasing

Part Number Pkg Code Min Temp Max Temp Status Suggested Replacement Buy Now Order Samples PDN
XR22802IL56-F QFN56 8x8 OPT1 -40 85 Active Order
XR22802IL56TR-F QFN56 8x8 OPT1 -40 85 OBS
XR22802IL56-0A-EB Board Active
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Packaging

Pkg Code Details Quantities Dimensions
QFN56 8x8 OPT1
  • JEDEC Reference: MO-220
  • MSL Pb-Free: L3 @ 260°C
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 29ºC/W
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: 260
  • Quantity per Reel: 3000
  • Quantity per Tube: n/a
  • Quantity per Tray: 260
  • Reel Size (Dia. x Width x Pitch): 330 x 16 x 12
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 8.00
  • Width: 8.00
  • Thickness: 1.00
  • Lead Pitch: 0.50

Notifications

Distribution Date Description File
08/07/2024 MaxLinear has qualified Greatek, Taiwan, assembly site. In addition, the XR16M890IL32-F, XR20M1280IL24TR-F, XR21V1412IL32-F, and XR21V1412IL32TR-F have been qualified for Copper (Cu) wire bonding assembly. There is no change to product datasheet, form, fit or function.
07/17/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability. ADDENDUM A: Fixed MBB label logo for DX204001 to MaxLinear logo. ADDENDUM B: Replaced ‘All other affected products outer box label’ with clearer pictures. Corrected Date Issued (from original PCN) issue date +90 days to August 30, 2023.
06/01/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability.
06/01/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability. ADDENDUM: Fixed MBB label logo for DX204001 to MaxLinear logo.
01/31/2022 To increase manufacturing capacity, MaxLinear has qualified UTL3 extension site as an alternate assembly site together with UTL1 for QFN and DFN products.
10/08/2021 In addition to the currently qualified UTAC, Thailand site, MaxLinear has qualified ANST, China, as an alternate site for assembly and test for the devices noted above. There is no change to datasheet, form, fit or function of the devices.
07/11/2017 Product Discontinuation Notification
01/31/2017 Addition of qualified 12 inch wafer processing line in Global Foundries, in addition to the currently qualified 8 inch wafer processing. Note: Reliability report will be available February 17, 2017.

Videos

MxL UARTs Auto RS-485 Direction Control

This video describes how the automatic RS-485 half-duplex direction control feature in MaxLinear UARTs reduces driver development and frees up CPU/MCU loading. This feature eliminates the need to monitor the status of the UART’s transmit shift register and automatically switches MaxLinear RS-485 transceivers from the transmit mode to the receive mode. This video summarizes the content in application note DAN-190. 

Company
Information
Contact Us
Careers
Maximize Your Potential

Join the MaxLinear team and help shape the future of networking and communications technology.

© 2024 MaxLinear. All Rights Reserved.