Overview
| Supported EVKs | DW920 |
|---|---|
| G.hn Version | Wave-2 |
| Physical Medium | Power line |
| Function | Analog Front End |
| Signal Channels | 1 |
| Supported MIMO Modes | N/A |
| Max Net Throughput | N/A |
| Supported G.hn Profiles | Power line MIMO 100MHz, Power line SISO 100MHz |
| Data Interfaces | N/A |
| Temperature Range (°C) | 0 to 70 |
| Information |
The 88LX2720 is a programmable, high-performance Wave-2 G.hn analog front-end (AFE) for powerline communications. It offers one transmission channel and two reception channels to enable both SISO operation using one device and MIMO using two devices. In addition to the transmission and reception paths, the 88LX2720 contains a biasing circuit and a register block controlled from the digital interface.
The 88LX2720 AFE is used in the DW920 G.hn Wave-w Powerline Networking Evaluation Kit.
- Designed for powerline wireline medium
- Programmable transmission and reception gains
- Integrated filters
- Integrated line driver
- Powerdown and Standby mode
- Very low noise and distortion over the entire transmission and reception paths
- 4mm x 4mm 28-pin QFN package
- Support for multiple AFEs operating in parallel with only one Digital Baseband (DBB) processor 88LX5152
- Supported standards:
- Code of Conduct on Energy Consumption of Broadband Equipment Version 5.0, European Commission
- ITU-T G.9960, G.9961, G.9962, G.9963, G.9964
- Powerline-to-Ethernet adapter
- WiFi extender
- Embedded G.hn modem
Documentation & Design Tools
| Type | Title | Version | Date | File Size |
|---|---|---|---|---|
| Data Sheets | 88LX2720 Wave-2 G.hn AFE Data Sheet | R03 | July 2020 | 293.2 KB |
| Product Flyers | G.hn Wave-2 Networking Products | May 2020 | 838.1 KB |
Parts & Purchasing
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
