Overview
| Information | |
|---|---|
| # of Outputs | 2 |
| IOUT/Ch (A) | 13 |
| VIN MIN (V) | 4.5 |
| VIN MAX (V) | 18 |
| IQ (µA) | |
| VOUT MIN (V) | 0.6 |
| VOUT MAX (V) | 5.3 |
| Frequency (kHz) | 250-780 |
| Efficiency (%) | 95 |
| X-Y Dimension (mm) | 15x15 |
| Z Dimension (mm) | 4.41; 5.01 |
| Package | LGA |
| Features | UVLO, OTP, Soft Start/Tracking, Frequency Synchronization, Short Circuit Protection, PGOOD, Over Current Protection, Output Overvoltage Protection, PFM, Adjustable Frequency |
| Junction Temp Range (°C) | -40 to 125 |
The MxL7213 dual step-down power module integrates the control, drivers, bootstrap diodes, inductors and MOSFETs in a single package for point-of-load supplies. Operating from an input voltage range of 4.5V to 18V, the MxL7213 supports two outputs each with an output voltage range of 0.6V to 5.3V, set by a single external resistor. Just a few input and output capacitors are required. It supplies either two 13A outputs, a single 26A or up to 100A when paralleled with additional MxL7213 modules. Attention to thermal design, component selection and internal construction results in higher efficiency and extended operating range than devices with the same industry standard pinout.
Supply rail sequencing is supported as well as frequency synchronization, multiphase operation and output voltage tracking. Device temperature monitoring is accomplished with an onboard temperature diode. The peak current mode architecture provides very fast transient responses to line and load changes and doesn’t sacrifice stability.
A host of protection features, including over-current, over-temperature, short-circuit and UVLO, help achieve safe operation under abnormal operating conditions. Available in space saving and thermally enhanced 15mm x 15mm packaging, the 4.41mm height LGA package and the 5.01mm height BGA package have RoHS compliant terminal finish.
Supply rail sequencing is supported as well as frequency synchronization, multiphase operation and output voltage tracking. Device temperature monitoring is accomplished with an onboard temperature diode. The peak current mode architecture provides very fast transient responses to line and load changes and doesn’t sacrifice stability.
A host of protection features, including over-current, over-temperature, short-circuit and UVLO, help achieve safe operation under abnormal operating conditions. Available in space saving and thermally enhanced 15mm x 15mm packaging, the 4.41mm height LGA package and the 5.01mm height BGA package have RoHS compliant terminal finish.
- Dual 13A or single 26A output
- Offers power system ease of design
- 4.5V to 16V wide single input voltage
- 0.6V to 5.3V adjustable output voltage
- Multiphase current sharing with multiple MxL7213s for up to 100A output
- Frequency synchronization
- Higher efficiency and wider Vin range than competitive devices with same compatible industry standard pinout
- Remote differential sense amplifier
- Peak current mode architecture for fast transient response
- Adjustable switching frequency (250kHz to 780kHz)
- Overcurrent protection
- Output overvoltage protection
- Internal temperature monitor and thermal shutdown protection
- Thermally enhanced 15mm x 15mm x 4.41mm LGA package and 15mm x 15mm x 5.01mm BGA package
- Download the SIMPLIS Model
- Telecom and Networking Equipment
- Industrial Equipment
- Test Equipment
Documentation & Design Tools
All Types
Data Sheets
Application Notes
Schematics & Design Files
Product Briefs & Brochures
Design Tools & Simulation
User Guides & Manuals
| Type | Title | Version | Date | File Size |
|---|---|---|---|---|
| Data Sheets | MxL7213 Dual 13A Power Module | R03 | September 2019 | 2.5 MB |
| Application Notes | LGA / BGA Module Assembly Application Note | Rev D | May 2019 | 1023.6 KB |
| User Guides & Manuals | MxL7213 EVB User's Manual | R05 | October 2020 | 4.6 MB |
| User Guides & Manuals | MxL7213 Quad EVB User's Manual | R00 | November 2019 | 8.1 MB |
| Product Flyers | Current Mode, Dual Channel Power Modules Flyer | R00 | November 2020 | 2.7 MB |
| Schematics & Design Files | MxL7213 Evaluation Board Gerber Files | October 2019 | 421.6 KB | |
| Product Briefs | MxL7213 Product Brief | September 2019 | 544.6 KB | |
| SIMPLIS Models | MxL7213 SIMPLIS Model | Alpha | September 2019 | 132.5 KB |
| Product Brochures | Power Management Brochure | R01 | November 2024 | 2.4 MB |
Quality & RoHS
| Part Number | RoHS | Exempt | RoHS | Halogen Free | REACH | TSCA | MSL Rating / Peak Reflow | Package |
|---|---|---|---|---|---|---|---|
| MxL7213-AYA-T | N | Y | Y | Y | Y | L3 / 245ᵒC | LGA144 15x15 OPT2 |
| MxL7213-ABA-T | N | Y | Y | Y | Y | L3 / 245ᵒC | BGA144 15x15 |
| MxL7213-EVK-000-A | N/A | N/A | N/A | N/A | N/A | N/A | Kit |
| MxL7213-EVK-001-A | N/A | N/A | N/A | N/A | N/A | N/A | Kit |
| MxL7213-EVK-002-A | N/A | N/A | N/A | N/A | N/A | N/A | Kit |
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Additional Quality Documentation may be available, please Contact Support.
Parts & Purchasing
| Part Number | Pkg Code | Status | Suggested Replacement | PDN |
|---|---|---|---|---|
| MXL7213-ABA-T | BGA144 15x15 | OBS | MxL7213-AYA-T | |
| MXL7213-AYA-T | LGA144 15x15 OPT2 | OBS | MxL7218-ABA-T | |
| MXL7213-EVK-1 | Kit | OBS | ||
| MXL7213-EVK-2 | Kit | OBS | ||
| MXL7213-EVK-3 | Kit | OBS | MxL7213-EVK-1 |
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Packaging
| Pkg Code | Details | Quantities | Dimensions |
|---|---|---|---|
| BGA144 15x15 |
|
|
|
| LGA144 15x15 OPT2 |
|
|
|
Notifications
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
Visit the product page for the part you are interested in. The part's status is listed in the Parts & Purchasing section. You can also view Product Lifecycle and Obsolescence Information including PDNs (Product Discontinuation Notifications).
To visit a product page, type the part into the search window on the top of the MaxLinear website.
In this example, we searched for XRA1201. Visit the product page by clicking the part number or visit the orderable parts list by clicking "Orderable Parts".
The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product. Click Show obsolete parts, to see all EOL or OBS products.
Find the product page of the part that you want to get an evaluation board for and click on Parts & Purchasing. Example:
Find the icons under Buy Now or Order Samples:
Click on the Buy Now icon and see who has stock and click on the Buy button:
Alternatively, you can click on the Order Samples
If the icons are missing, then contact Customer Support.
